DERFLEX supplies printable PVC self adhesive vinyl rolls for distributors, sign and print companies, converters, fleet-graphics businesses and OEM media programs. Build a wholesale SAV range around the actual job: face-film family, adhesive behavior, liner, width, printer/ink system and installation surface.
A professional SAV supplier should help define the complete roll construction—not just quote “printable vinyl.” For wholesale buying, the critical variables are the PVC face-film family and thickness, adhesive type and color, release liner, bubble-release requirement, roll width, ink compatibility, target surface, service conditions and packing format.
Use the ranges below as a sourcing starting point. Availability is model-dependent, so the final quotation should identify the exact product construction rather than rely on a generic SAV description.
| Selection Item | Published DERFLEX Options | Wholesale Buying Relevance |
|---|---|---|
| Core construction | PVC face film + pressure-sensitive adhesive + release liner | Defines print surface, bonding behavior, converting and installation workflow. |
| Face-film family | Commercial / monomeric / polymeric / cast options | Separate economy signage, fleet graphics and conformable wrap requirements. |
| Common film thickness | 0.06 / 0.08 / 0.10 / 0.12 mm on SAV lines | Influences handling and stiffness; it should never be the only buying criterion. |
| Adhesive behavior | Permanent or removable; normal or stronger adhesive options | Match planned removal, substrate condition and bonding requirement. |
| Adhesive color | Clear / grey / black / white | Grey or black can improve hiding; clear supports transparent constructions. |
| Release liner | 100 / 120 / 140 gsm; bubble-free construction on selected grades | Affects printer feed, cutting, handling and installation workflow. |
| Width | Approx. 0.914–2.02 m across selected models | Plan around printer capability, panel layout, yield and local market demand. |
| Roll length | 50 m commonly published | Useful for standardizing distributor inventory and print-production planning. |
| Ink systems | Solvent / eco-solvent / UV / latex by grade | Confirm the exact media profile and curing/drying workflow before bulk runs. |
| OEM / packing | Project-specific roll and packaging discussion | Useful for distributor, private-label and repeat-order programs when confirmed. |
For factory-focused sourcing information, compare DERFLEX's self adhesive vinyl manufacturer in China page. Final availability, MOQ, lead time, packing and compliance documentation should be confirmed for the selected grade.
These model references are published by DERFLEX and can help buyers discuss a starting construction. A supplier program should still be selected by application and installation conditions—not by model number alone.
| Model | Published Construction | Max Width | Roll Length | Typical Sourcing Direction |
|---|---|---|---|---|
| DY6300W | 0.08 mm PVC + 120 gsm liner | 1.52 m | 50 m | General printable adhesive vinyl programs |
| DY6302W | 0.10 mm PVC + 140 gsm liner | 2.02 m | 50 m | Wider-format general printable vinyl |
| DY6302G | 0.10 mm PVC + 140 gsm liner + grey glue | 2.02 m | 50 m | Applications that need stronger background hiding |
| DY6302BM | 0.10 mm PVC + 140 gsm liner + black glue | 2.02 m | 50 m | High-hiding graphic applications |
| DY6302T-2 | 0.08 mm polymeric, 140 gsm liner, bubble-free, clear removable adhesive | 2.02 m | 50 m | Installation-focused polymeric graphic programs |
| DY6401 | 0.08 mm clear self adhesive vinyl + 120 gsm liner | 1.52 m | 50 m | Transparent window and clear graphic concepts |
| DY6411 | 0.10 mm high-clear vinyl + 120 gsm liner | 1.52 m | 50 m | Higher-clarity window graphics |
Published model data should be reconfirmed at quotation because product constructions and available widths can change over time. For a broader product description, see printable self adhesive vinyl.
A strong distributor assortment is easier to sell when each grade has a clear job. Avoid stocking multiple rolls that differ only on paper but solve the same customer problem.
Use commercial or monomeric constructions where the work is mainly flat boards, promotional signs, simple decals and price-sensitive printing. Confirm ink compatibility, adhesive choice and actual outdoor requirement before positioning the grade.
Polymeric grades are a better direction when buyers need improved dimensional stability for vehicle body graphics, fleet branding and more demanding outdoor use on flat or mildly curved surfaces.
Add specialty grades only where the market values the function: air-release installation, transparent windows, high-clear graphics, stronger hiding, removable campaigns or other defined application requirements.
Supplier comparison should move beyond unit price. The better question is whether the supplier can hold a complete construction consistently across samples, production and repeat orders.
This process gives buyers and suppliers the same technical reference before volume increases.
Sticker, board, wall, window, fleet decal, vehicle panel or another application.
Specify ink technology, surface material and whether the geometry is flat, mildly curved or complex.
Choose the film family, thickness direction, finish, tack behavior and adhesive color.
Confirm width, roll length, core, carton/hard-tube or other agreed export packing requirements.
Print, cure/dry, cut, laminate if required, and test on the real installation substrate.
Reference the approved construction so later purchases can be checked against the same agreed variables.
The adhesive layer affects hiding, removal behavior and installation outcome. Wholesale buyers should define it as part of the SKU, not leave it as an unspecified factory choice.
Useful where the adhesive color should remain visually neutral or where transparent constructions are required. Confirm background visibility before approval.
Useful when old graphics, dark substrates or visual variation underneath could show through the new print. Hiding performance should be tested on the target surface.
Choose for planned campaign removal, but do not assume residue-free performance on every substrate. Test the actual surface, aging and exposure conditions.
Choose when stronger long-term bonding is the priority. Surface preparation and substrate compatibility remain important even with a higher-tack construction.
Real DERFLEX-hosted images help buyers verify the material format and understand where different printable vinyl constructions are used.
Use the application first, then specify the film and adhesive. This avoids the common mistake of treating all printable self adhesive vinyl as interchangeable.
| Application | Starting Direction | Adhesive / Liner Focus | Why |
|---|---|---|---|
| Flat signs & boards | Commercial / monomeric printable vinyl | Permanent or removable by campaign; stable liner | Conformability demand is limited, so cost and print handling usually matter more. |
| Fleet doors & simple vehicle panels | Polymeric direction | Grey/clear options; bubble-free if installation speed matters | Better dimensional stability is useful for longer graphics and mild curves. |
| Full wraps / compound curves | Cast or specifically conformable wrap grade | Installation-focused adhesive system | General sticker vinyl should not be assumed suitable for deep channels and recesses. |
| Window graphics | White, clear or high-clear depending visual goal | Clear adhesive where transparency is required | Visibility, transparency and background appearance become key selection variables. |
| Temporary promotional graphics | Economy or application-matched film | Removable behavior where planned removal is required | Removal plan matters as much as initial tack. |
| Old graphic / dark substrate cover | Opaque printable film | Grey or black adhesive direction | Improved hiding can reduce show-through from the underlying surface. |
For window advertising where see-through perforation is required, compare one way vision vinyl rather than using a solid SAV grade.
Most sourcing failures begin with an incomplete specification. The following mistakes are more expensive at container or distributor scale because they multiply across many rolls.
Two 100-micron films can behave differently because film family, adhesive, liner, surface treatment and dimensional stability can differ.
Compound curves, channels and recesses generally require a cast or specifically engineered conformable wrap film.
Clear adhesive can reveal the background. Grey or black adhesive can improve hiding over darker or previously printed surfaces.
Removal can vary with substrate chemistry, paint condition, heat, UV exposure and aging. Test the actual surface.
Ink adhesion and curing should be checked with the real printer profile, ink loading and production speed before a large run.
Approve film, adhesive, liner, width, winding and packaging together so the next order can reference one accepted construction.
DERFLEX publishes multiple self adhesive vinyl film families, adhesive colors, removable/permanent constructions, liner weights and widths. The supplier conversation can therefore begin with the end application and move toward a defined construction for sampling, approval and repeat ordering.
For private-label or distributor programs, DERFLEX's current product information also supports project-specific roll and packaging discussion. Details should be confirmed for the selected grade and order.
A complete RFQ helps the supplier recommend a usable grade instead of quoting an unsuitable generic vinyl roll.
Not every printed graphic requires the same laminate. For vehicle and outdoor work, a compatible overlaminate may add mechanical protection and should be matched to the selected face film and service environment.
Do not combine a random overlaminate with the printable film. Confirm the face film, ink cure/dry condition and the intended finish before production.
DERFLEX also supplies cold lamination film for printed graphics. The correct pairing should be confirmed for the chosen SAV grade and end use.
These verified DERFLEX pages cover closely related materials without duplicating the wholesale-supplier focus of this page.
Direct answers for importers, distributors, print companies and buyers comparing wholesale printable vinyl rolls.
A self adhesive vinyl supplier provides pressure-sensitive printable film rolls made from a face film, adhesive and release liner. For professional B2B sourcing, the supplier should help define the full construction—film family, thickness, adhesive behavior/color, liner, width, print compatibility and target application—rather than quote only a generic “vinyl roll.”
SAV is commonly used as an abbreviation for self adhesive vinyl. In large-format printing it usually refers to printable pressure-sensitive vinyl used for stickers, signage, windows, wall graphics and vehicle graphics, with the exact application depending on the film and adhesive construction.
Monomeric vinyl is commonly used for economical flat graphics. Polymeric vinyl provides better dimensional stability for more demanding outdoor and vehicle applications on flat or mildly curved surfaces. Cast vinyl is the category to consider for higher conformability and complex vehicle contours. The exact grade should be matched to the job.
DERFLEX product information lists solvent, eco-solvent, UV and latex compatibility across selected self adhesive vinyl lines. The selected grade should still be tested with the actual printer profile, ink loading and curing/drying settings before bulk production.
DERFLEX publishes selected self adhesive vinyl widths from approximately 0.914 m up to 2.02 m, with 50 m commonly shown as the roll length. Exact width availability depends on the model and should be confirmed in the quotation.
Choose removable adhesive when planned removal is part of the campaign, and permanent adhesive when stronger long-term attachment is the priority. Removal behavior can vary with substrate chemistry, paint condition, heat and aging, so test the actual surface rather than relying on the label alone.
Grey or black adhesive can improve hiding when a new graphic is applied over a dark substrate, old graphic or inconsistent background. Clear adhesive is more appropriate where backing color should remain neutral or where a transparent construction is required.
Provide the end use, printer/ink system, installation surface and geometry, required film family or thickness, finish, adhesive type/color, liner preference, width, roll length, quantity, packaging requirements, destination market and any required documentation. This gives the supplier enough information to recommend an appropriate construction.
Send DERFLEX your application, printer/ink system, surface, preferred film and adhesive, roll width and expected quantity. The quotation can then be based on a defined construction instead of an unspecified printable vinyl roll.