News
Industry News

PVC Tarpaulin Thickness Guide: GSM, mm, Mil & Oz Conversion | DERFLEX

Update:2026/11/21 4:21:15 Views:
DERFLEXRequest a Quote
TECHNICAL CONVERSIONS / 02

PVC Tarpaulin Thickness Guide: GSM, mm, Mil & Oz Conversion

Four units. Two different measurements. Thickness and area weight are not interchangeable. GSM and oz/yd² describe mass per unit area; millimetres and mil describe physical thickness. For a PVC coated polyester tarpaulin, the textile base, coating mass, polymer formulation, texture and measurement pressure can change thickness at a given GSM.

Discuss Your SpecificationExplore the Guide
PVC coated tarpaulin samples with distinct coatings and constructions
PVC coated tarpaulin samples with distinct coatings and constructions
Technical quick answer

Thickness and area weight are not interchangeable. GSM and oz/yd² describe mass per unit area; millimetres and mil describe physical thickness. For a PVC coated polyester tarpaulin, the textile base, coating mass, polymer formulation, texture and measurement pressure can change thickness at a given GSM.

01 / TECHNICAL GUIDE

The conversion rule

GSM ↔ oz/yd² is a direct unit conversion: oz/yd² = GSM ÷ 33.906; GSM = oz/yd² × 33.906. Thickness converts directly between millimetres and mil: mil = mm × 39.3701; mm = mil × 0.0254. There is no universal GSM ↔ mm, GSM ↔ mil or oz ↔ mil formula.

02 / TECHNICAL GUIDE

Thickness conversion table

Use this chart for physical thickness only. A “mil” is one-thousandth of an inch, not a millimetre. The finished coated fabric must be measured under a stated test method and pressure.

Thickness (mm)Mil (1/1000 in)Reading
0.207.9Thin material reference
0.3011.8Thickness measurement
0.4015.7Thickness measurement
0.5019.7Thickness measurement
0.6023.6Thickness measurement
0.7529.5Thickness measurement
1.0039.4Thickness measurement

Indicative selection or unit conversion references; not a substitute for a product data sheet and approved test values.

03 / TECHNICAL GUIDE

Reading an 18 oz specification

An 18 oz/yd² vinyl tarp weighs about 610 GSM. That tells you how much one square yard weighs, not how thick the PVC coating is. Two 18 oz constructions can differ in yarn, coating share, embossing, bend behavior and measured thickness.

04 / TECHNICAL GUIDE

How coated textile is measured

For procurement, use ISO 2286-2 for coated-fabric mass per unit area and ISO 2286-3 for thickness at specified pressure, where applicable. Record the actual method, edition, conditioning and specimen positions. Test data from different methods should not be silently mixed.

05 / TECHNICAL GUIDE

Decide with four properties

Ask for GSM, measured thickness, textile reinforcement and mechanical test results together. Include directional tensile and tear, coating adhesion, low-temperature flexibility and seam tests where relevant. Establish agreed tolerances on the approved sample and purchase order.

APPLICATION / FIELD USE

From fabric specification to real-world performance

Finished PVC tarpaulin cover securing a transport load
Finished truck cover: attachment, seams and contact points affect the specification.

Check the complete assembly

A fabric roll can meet the nominal weight and still perform poorly as a finished cover if the edge reinforcement, fold pattern, hardware spacing or welding process is unsuitable. Evaluate the complete application before confirming a bulk order.

For exposure to wind, abrasion, sub-zero folding, chemicals or specific flame requirements, request tests and acceptance values relevant to the precise application—not generic claims.

Request Technical Review
COMMON BUYER QUESTIONS

Frequently asked questions

How do you convert GSM to mm for PVC tarpaulin?

You cannot convert GSM directly to mm without knowing and validating the complete material construction and measurement conditions.

How thick is 20 mil in mm?

20 mil equals 0.508 mm.

Is 0.5 mm the same as 500 GSM?

No. 0.5 mm is thickness and 500 GSM is mass per unit area.

How many GSM is 18 oz per square yard?

Approximately 610 GSM.

Does a thicker tarp always last longer?

No. Fabric reinforcement, tear resistance, coating adhesion, UV stability and fabrication can be more important than thickness alone.

Which measurement standard is relevant?

ISO 2286-2 addresses coated-fabric mass per unit area; ISO 2286-3 addresses thickness at specified pressure.

RELATED DERFLEX RESOURCES

Continue your specification research

BULK PURCHASING / NEXT STEP

Turn this guide into a measurable RFQ.

Share application, required width or finished dimensions, quantity, mechanical targets, operating climate, joining or fixing method, colors, destination and any approved benchmark sample. DERFLEX can review the specification for an appropriate quotation.

Request a Quote
Consulting Services
+86-021-54361792 / 54361798
Email
sales@derflex.com